/FL - 100
Two Wire Turbine Flow Meter with LCD display
Product Description
Electronet series FL-100 are Two Wire Turbine Flow Transmitters specially used for various industrial applications. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow.
The frequency is linearly proportional to flow rate which is converted to electrical signal 4 – 20 mA. Turbine flow meters are preferred for clean, filtered, low viscosity fluids. The typical accuracy and repeatability of turbine flow meters are Plus/Minus 0.5% and Plus/Minus 0.1%, respectively. However, it is possible to achieve accuracy of Plus/Minus 0.25% and repeatability of Plus/Minus 0.05%.
The frequency is linearly proportional to flow rate which is converted to electrical signal 4 – 20 mA. Turbine flow meters are preferred for clean, filtered, low viscosity fluids. The typical accuracy and repeatability of turbine flow meters are Plus/Minus 0.5% and Plus/Minus 0.1%, respectively. However, it is possible to achieve accuracy of Plus/Minus 0.25% and repeatability of Plus/Minus 0.05%.